Adhesive dispenser Pneumatic or Semiautomatic Filler
797,19zł
Adhesive dispensing machine is used in different fields of industries, electronics, aviation, optics, chemical, automobile, medical treatment, petroleum, packaging,
Jewelry and machinery industry.
Our machines pass a demanding quality control in this way we guarantee 2️⃣ years of warranty and technical support in case of breakdown
Liquid glue dispenser Pneumatic and Semiautomatic Filler
Machine for manually or automatically dosing glue with a timer, it has a pedal, with this machine you can have more precise results, better finished pieces and an increase in production, the useful life of this machine is up to ? years old. anti-drip system. Designed for a wide range of applications such as EFD, I&J Fisnar.
Complete with an accessory dosing kit.
Timer mode dosing time 0.01-99.99 seconds.
Timer mode cycle time 0.1-9.9 seconds.
Manual mode, materials can be dispensed continuously until the operator releases the foot pedal.
Is adhesive dispenser It must be connected to the air compressor (1.5 HP or higher).
The adhesive dispenser Professional, Precise adopts the latest digital control system,
1. Dispensing type: Free to set 16 kinds of shapes, with dispensing time display
2. Automatic timer dosage: 00.01S-99.99S
3. Manual timing dosing: Can dispense coating, or continuous line
4. Minimum adhesive dosage: 0.0001 ml
5. Dosing time range: 0.1-9.9S (auto timing function)
6. Input voltage: 220V -10% 50 Hz / 110V -10% 60 Hz (220V for Europe; 110V for America, etc.)
7. Internal voltage: 12V DC / 24V DC
8. Input air pressure: 10-100pSi
9. Outlet air pressure: 1-80pSi
10. Overall Dimension: 235*225*63mm
11. Net Weight: 2.2Kg
1. Power switch: placing light shows “On”, light off shows “Off”
2. Dispensing time display: Setting time on the screen
3. Air inlet pressure regulator: pull out first, reversal is lower pressure, vent is higher pressure
4. Barometer: display range: 0-100pSi
5. Vacuum control unit: Reversing is vacuum pump high, speed is vacuum pump low
6. Test button: During testing, you can replace the foot switch
7. Dispensing time dialing code button: Display the setting time, it adopts the form of adding and subtracting 00.01S-99.99S
8. time interval setting dial code button: display setting time, adopt add and subtract form 0.1S-9.9S
9. Dosing output interface: Connect to the dispensing needle barrel.
10. Air pressure input interface: Connect to clean high pressure source (compressor)
11. Dispensing way: 16 kinds of free
12. The foot controller interface: connect to the foot switch
13. Power input jack
14. Gun holder
CONTENTS:
1 adhesive dispensing machine
1 foot switch
1 hand switch
1 dispenser holder
2 30 cc liquid syringe
1 Air tube to syringe
1 Air tube to air source
1 set steel and plastic needle
1 power cord
In this video you can see the operation of the machine
Weight | 10 kg |
---|---|
Dimensions | 20×35×35 cm |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.