{ "id": 17746, "date": "2025-08-18T18:36:52", "date_gmt": "2025-08-18T16:36:52", "guid": { "rendered": "https:\/\/distribucionarc.com\/?p=17746" }, "modified": "2025-08-18T21:44:52", "modified_gmt": "2025-08-18T19:44:52", "slug": "three-dimensional-dicing-machine-arcmftc900-ar10169", "status": "publish", "type": "post", "link": "https:\/\/www.distribucionarc.com\/en\/maquina-de-cortar-en-dados-tridimensional-arcmftc900-ar10169\/", "title": { "rendered": "ARCMFTC900 AR10169 THREE-DIMENSIONAL DICE CUTTING MACHINE" }, "content": { "rendered": "
\n\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

USER GUIDE<\/h2>

Dear user: Before using the product, please read the product instruction manual carefully.<\/p>

\"\"<\/p>

INDEX \/ TABLE OF CONTENTS<\/h2>
\u00a0<\/div>
\u00a0<\/div><\/div><\/div><\/div><\/div>
  1. GENERAL INFORMATION \u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026.1<\/li>
  2. STRUCTURAL CHARACTERISTICS AND OPERATING PRINCIPLE. \u2026\u2026\u2026\u2026\u2026.1<\/li>
  3. MAIN TECHNICAL PARAMETERS \u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u20263<\/li>
  4. OPERATION AND USE \u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026.3<\/li>
  5. FAULT ANALYSIS AND ELIMINATION\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u20267<\/li>
  6. MAINTENANCE AND MAINTENANCE:\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026..8<\/li>
  7. TRANSPORT AND STORAGE \u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026 10<\/li><\/ol>
    \u00a0<\/div>

    1. GENERAL INFORMATION<\/h2>

    The Model 100 Dicing Machine is suitable for dicing boneless meat at approximately -6\u00b0C, as well as dehydrated vegetables, deep-frozen vegetable processing plants, and pickling industries to process various root and stem vegetables into cubes and dices. It has a regular shape and smooth cutting surface. This machine features an advanced design, convenient operation, low energy consumption, and high efficiency. It is made of aluminum alloy and stainless steel, which is corrosion-resistant and meets hygiene and certification standards.<\/p>

    2. STRUCTURAL CHARACTERISTICS AND OPERATING PRINCIPLE.<\/h2>

    2.1. To know the structural characteristics,<\/h3>

    Refer to the dicing machine schematic diagram (Figure 1) and the transmission schematic diagram (Figure 2)<\/p>

    \"\"<\/p>

    Numbered components:<\/strong><\/p>

    1. Housing<\/li>
    2. Adjusting screw<\/li>
    3. Switch<\/li>
    4. Quadrant nut<\/li>
    5. Adjustment plate<\/li>
    6. Quadrant<\/li>
    7. Adjustment frame<\/li>
    8. Limiter<\/li>
    9. Adjustment handle<\/li>
    10. Eccentric handle<\/li>
    11. Slicing knife<\/li>
    12. Slicer blade holder<\/li>
    13. Wire cutter body<\/li>
    14. Setscrew<\/li>
    15. Wire retaining plate<\/li>
    16. Comb holder<\/li>
    17. Fixed blade body<\/li><\/ol>
      \"\"<\/a><\/div>
      \u00a0TEXTS IN THE IMAGE:<\/div>
      rotating drum = rotating drum<\/div>
      pot = pot<\/div>
      gear I = gear I<\/div>
      large pinion = large pinion<\/div>
      chain = chain<\/div>
      main gear = main gear<\/div>
      engine = motor<\/div>
      feed hopper = feed hopper<\/div>
      vertical blades = vertical blades<\/div>
      V-belt = V-belt<\/div>
      small pinion = small pinion<\/div>
      horizontal blades = horizontal blades<\/div>
      middle gear = medium gear<\/div>
      gear \u2013 = gear \u2013<\/div>
      large V-pulley = large V-pulley<\/div>
      \u00a0<\/div>

      2.1.1. The machine is mainly composed of a base, a casing, a dial, a vertical blade, a horizontal blade body, a horizontal cutting blade body, a transmission system, and an electrical control system.<\/p>

      2.1.2. The frame, casing, hopper and main parts of the machine are made of aluminum alloy and stainless steel to ensure long-term operation without corrosion and toxicity.<\/p>

      2.2. Operating principle<\/p>

      The dial of this machine drives the object to be cut to rotate at high speed, and the centrifugal force of the object cuts the object into slices with the help of force. It then cuts it into strips through the disc shredder blade and sends the material to be cut onto the horizontal cutting edge. The cross-cutting blade cuts it into the required cubes. (Figure 3, schematic diagram of dicing)<\/p><\/div>

      \"\"<\/p><\/div>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

      \n\t\t\t\t\t
      \n\t\t\t\t
      \n\t\t\t\t
      \n\t\t\t\t\t
      \t\t\t
      <\/span><\/div>\n\t\t\n
      \n
      \n\t\n\t\n
      \n\t
      \n\t\t\n\t\t\t\"\"\t\t<\/a>\n\n\t\t\t\t\t
      \n\t\t\t\t\n\t\t\t\t\t\"\"\t\t\t\t<\/a>\n\t\t\t<\/div>\n\t\t\t\t\t
      \n\t\t\t\t\t\t\t\t
      \n\t\t\t\n\t\t\t\tAdd to compare<\/span>\n\t\t\t<\/a>\n\t\t<\/div>\n\t\t\t\t\t\t\t
      \n\t\t\tQuick view<\/a>\n\t\t<\/div>\n\t\t\t\t\t\t\t\t
      \n\t\t\t\t\n\t\t\t\t\tAdd to wishlist<\/span>\n\t\t\t\t<\/a>\n\t\t\t<\/div>\n\t\t\t\t<\/div>\n\n\t\t\t\t\t
      \n\t\t\t\t\n\t\t\t\tA\u00f1adir al carrito<\/span><\/a>\t\n\t\t\t<\/span>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t<\/div>\n\t\t\t

      Dicing Machine for Small Diced Ham or Frozen Meat and Chicken 5mm to 15mm<\/a><\/h3>\n\t\t\t
      \n\t\t\tMeat slicers<\/a>, Dice<\/a>, Strips<\/a>, Cutters<\/a>\t\t<\/div>\n\t\t\t\t\n\t6.332,04$<\/span><\/bdi><\/span> Taxes included<\/small><\/span>\n\n\t\n\t\n\t\t<\/div>\n<\/div>\n<\/div>\n<\/div><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
      \n\t\t\t\t\t
      \n\t\t\t\t
      \n\t\t\t\t\t\t\t\t\t

      3. MAIN TECHNICAL PARAMETERS<\/h2>

      3.1. Production capacity:<\/h3>

      Up to 1000 kg\/h (when cutting 15 mm cubes)<\/p>

      3.2. Meat cutting specifications:<\/h3>

      5, 6, 8, 10, 12, 15mm cubes or cuboids can be cut, and other knife sizes can also be customized according to requirements.<\/p>

      3.3. Engine power:<\/h3>

      380V.1.5kW\/220V.2.2kw<\/p>

      3.4. Overall dimensions:<\/h3>

      640\u00d7610\u00d7950mm (length\u00d7width\u00d7height)<\/p>

      3.5. Machine weight:<\/h3>

      \u00a0<\/p>

      100kg<\/p>

      \u00a0<\/p>

      4. OPERATION AND USE<\/h3>

      4.1. Preparation and inspection before use<\/h4>

      4.1.1. First place the machine on a stable floor and then lock the caster wheels.<\/p>

      4.1.2. Check whether there are foreign objects in the housing and remove the foreign objects in the housing, otherwise it is easy to cause damage to the blade.<\/p>

      4.1.3. Clean the operating site, check whether the power supply voltage is consistent with the voltage used by the machine, find a professional electrician for the wiring, connect the machine's power cord to the grounded yellow-green wire, and connect the other three cores to a 6A circuit breaker (prepared by the user) at the lead wire terminal when disconnected. Reliably connect the ground wire to the grounding mark, or use wires to reliably connect to the equipotential terminal of other machines on the grounding studs outside the enclosure (2.5 mm\u00b2-6 mm\u00b2 for connecting wires), close the breaker, press the "ON" button, check whether the direction is correct (upward on the turntable, clockwise is correct); if not, cut off the power supply and adjust the wiring of two of the power lines.<\/p>

      4.1.4. Connect the water source for use.<\/p>

      4.1.5. When the machine is in operation, do not insert your hands or other foreign objects into the casing to avoid danger.<\/p>

      4.2. Operation and use<\/p>

      4.2.1. First, the material to be cut must be washed to remove impurities. If the material to be cut is mixed with sand and mud, the knife's cutting edge and blade will easily become damaged and dull. The maximum cutting diameter of the material should not exceed 80 mm; if it is larger than this diameter, it should be cut into small pieces.<\/p>

      4.2.2. Turn off the circuit breaker and close the enclosure door. The machine can start. If the door is not closed properly, the safety switch will operate and the motor will not operate.<\/p>

      4.2.3. The material to be cut is placed in the hopper, and under the action of the dial, it is cut into the required thickness by the vertical blade, then cut into strips by the disc shredder blade, and finally cut into squares by the horizontal cutting knife.<\/p>

      4.2.4. Adjusting the dicing specification: It is changed by adjusting the slice thickness, replacing the disc shredding blade and the cross-cutting blade.<\/p>

      \u00a0<\/p>

      4.2.4.1. Slice Thickness Adjustment: The slice thickness can be adjusted to the required thickness by adjusting the adjustment plate. First, loosen the fixing bolt on the housing adjustment plate, raise the adjustment plate, and turn the adjustment lever to the required position. Then, lower the adjustment plate and tighten it. Secure the bolt so that it is secure (as shown in Figure 4 Schematic diagram of slice thickness adjustment).<\/p>

      \u00a0<\/p>

      \u00a0<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

      \n\t\t\t\t\t
      \n\t\t\t\t
      \n\t\t\t\t\t\t\t\t\t

      \"\"<\/p>

      TEXTS IN THE IMAGE:<\/p>

      support plate = support plate<\/p>

      upper door = upper door<\/p>

      adjustment lever = adjustment lever<\/p>

      fixing bolts = fixing bolts<\/p>

      pot = pot<\/p>

      adjusting screw = adjusting screw<\/p>

      support plate = support plate<\/p>

      \u00a0<\/p>

      4.2.4.2. Disc shredder blade replacement: The replacement disc shredder combination blade has different specifications, such as 5 mm and 10 mm, and other specification combination blades can also be customized according to needs.<\/p>

      [TABLE: Figure 5 \u2013 Pitch of vertical disc cutting blades]<\/strong><\/p>
      Cutting thickness<\/th>Passing of pieces<\/th><\/tr><\/thead>
      5 mm<\/td>5 mm<\/td><\/tr>
      10 mm<\/td>10 mm<\/td><\/tr><\/tbody><\/table>

      Combined disc shredding cutters of various specifications are standard accessories and can be customized according to needs.<\/p>

      \u00a0<\/p>

      Replacing Sized Blades. Replacement steps: First, loosen your grip, push the handle down so that the micro-cut combination blade emerges from the comb. Then, loosen the nut at the end of the shaft, hook the slot at the front end of the combination tool with a hook wrench, remove the combination tool, and replace it with the required size combination tool. Tighten the nut at the end of the shaft. Move the handle up to observe whether the transmission gear inside the machine is properly meshed. If the meshing is correct, the handle will be close to the controller, and the shredded blade from the disc will enter the groove of the comb and the vertical blade. There is no friction between the upper blade and the comb and vertical blade. If it jams, tighten the handwheel and complete the replacement. (Figure 6)<\/p>

      \"\"<\/p>

      TEXTS IN THE IMAGE:<\/p>

      gear mesh controller = gear mesh controller<\/p>

      lever of movement = lever of movement<\/p>

      cutting blade = cutting blade<\/p>

      security screw = security screw<\/p>

      comb = comb<\/p>

      4.2.4.3. Replacement of Combination Cutting Tools for Cross Cutting. Depending on the cutting length and the requirements of the material to be cut, different types of combination cross-cutting knives are selected. Combination cross-cutting knives come in two specifications: 8-blade and 15-blade. Blades of other specifications can also be customized according to requirements, and the dimensions corresponding to the cutting length are as follows:<\/h5>

      Cross section and grade The number of slices in the cut group:<\/strong><\/p>